Saturday, May 2, 2009

Thermocouples

Still no testing to report but in the interest of keeping the blog alive, I thought I'd share a minor little tidbit.

If you want to measure the temperature of a metal part, say a combustion chamber, it can be hard to get a TC bead in good contact with the metal.   A better approach is to actually weld the TC wires to the part.   Through the magic of TCs, you can actually weld the two wires independantly.   Tonight I thought I'd try it out on a piece of scrap stainless tube with the TIG welder my wife bought me last year.

It turned out to be much easier than I thought it would be. (Please ignore the practice spots :)






Tuesday, April 7, 2009

Magic Smoke

Progress is still crawling along at glacial speeds due to my day job. I have flowed propellants through the motor, discovered some leaks, repaired leaks, and reassembled. The motor is on the stand once again and awaiting time for testing.

Tonight while I was testing the ignition system to see if the trigger rate had any effect on spark quality, I was reminded of what I learned in EE lab - semiconductors run on Magic Smoke. If you let the smoke out, they don't work anymore.

I'm using an ignition module designed for small R/C aircraft engines from CH Ignitions.


After being triggered at 200Hz for 10 minutes or so, it suddenly stopped sparking. Because it was warm to the touch, I decided I would disassemble it and confirm that I had let the smoke out.


200 Hz corresponds to about 24,000 RPM in a single cylinder 4 stroke, so its not great surprise that it quit on me. I've also not lost much time because I originally (2 years ago?) bought two modules. And that reminds me of one of the things I've learned working on these projects - Always buy at least one more than you think you'll need.

Sunday, February 22, 2009

Where does time go?

I can't believe that Feburary is almost over.  Due to my day job, I haven't had much free time to work on the new N2O-propane motor.  However, today I finally finished mounting it on the test stand.  I intend to test ignition and thrust levels using very short duration tests.  After I've gotten that worked out, I will go through the trouble of adding the regenerative cooling to the chamber.

Tuesday, February 17, 2009

The Rest of the Story

Here are the results for the other two cases...

M 1.851
p 29530 Pa
rho   0.398 kg/m^3
T 258.4 K
V 596.4 m/s
Drag 1750 N
Cd 0.764




M 0.936
p 27640 Pa
rho 0.377 kg/m^3
T 255.6 K
V 300.0 m/s
Drag  327 N
Cd 0.596



Monday, February 16, 2009

Unreasonable Request

I offered to run some CFD for Paul Breed of a simple "rocket like" geometry - a 8" by 8' tube.  I picked an arbitrary ogive nose cone and a bluff tail.

Here is the Mach number contour for the 150 m/s case.


The free stream conditions were:

M 0.468
p 27580. Pa
rho 0.376 kg/m^3
T 255.4 K
V 150.0 m/s
Drag 55.1 N

The calculated Cd is 0.40.   300 m/s and 600 m/s results to follow.