Wednesday, February 20, 2013
DMLS Chamber Version 2
Here are the specs for the redesigned version of the DMLS chamber. This project pending interest and resources. Drop me a line if you would be interested in supporting a project like this.
Tuesday, February 5, 2013
More Valves
I've been doing quite a bit of parts with Shapeways lately both flow models and functional parts. One of the latest is a rework of my servo actuated plug valve.
+(1).JPG)
Two parts allow a Swage-Lok SS-4P4T valve to be actuated by a Hitec servo - I recommend a high torque metal gear model like the HS-7954SH. The only other hardware required are (you'll need taps to clean up the threads in the nylon):
qty 4 8-32 x 5/16" Socket Head Cap Screws, McMaster-Carr 92196A191
qty 2 4-40 x 1.25" Socket Head Cap Screws, McMaster-Carr 92196A302
The printed parts are available on Shapeways
Shaft: http://www.shapeways.com/model/903741/shaft-coupler-hitec.html?li=productBox-search
Bracket: http://www.shapeways.com/model/903740/bonnet-ss-4p4t.html?li=productBox-search
+(1).JPG)
Two parts allow a Swage-Lok SS-4P4T valve to be actuated by a Hitec servo - I recommend a high torque metal gear model like the HS-7954SH. The only other hardware required are (you'll need taps to clean up the threads in the nylon):
qty 4 8-32 x 5/16" Socket Head Cap Screws, McMaster-Carr 92196A191
qty 2 4-40 x 1.25" Socket Head Cap Screws, McMaster-Carr 92196A302
The printed parts are available on Shapeways
Shaft: http://www.shapeways.com/model/903741/shaft-coupler-hitec.html?li=productBox-search
Bracket: http://www.shapeways.com/model/903740/bonnet-ss-4p4t.html?li=productBox-search
Subscribe to:
Posts (Atom)